• Company Profile
  • Services
  • Industry Applications
  • Quality & Safety
  • FAQ
  • Resources
  • Blog
Open
Powder, Liquid & Pipeline Coating Experts
REQUEST INFO REQUEST A QUOTE

Automatic Coating Corrosion Protection FAQ

Do all powder coating shops provide masking?

No. ACL has the personnel, equipment and experience to handle masking of any detail.

Can I powder coat only a section of a part?

Yes. With ACL’s masking technology ACL can provide off the shelf masking or customized tooling to ensure the desired areas are free of powder coating.

Do all powder coating shops have grit blasting?

No. Most powder coating shops do not provide grit blasting. ACL has possibly the most extensive grit blasting equipment in house in North America.

Does coating over mill scale and rust effect the longevity of powder coating?

Yes. Failure to properly remove rust and lime scale on existing surfaces will result in premature coating failure including peeling, cracking and bleeding rust. Grit blasting is crucial to a quality finish on corroded products.

Are there different powders for interior and exterior?

Interior coatings if they are for the home or office are generally very simple. Some wear and tear issues and possibly UV from a window make effect the powder choice. Generally low film 2-3 mils hybrids, polyesters or polyurethane's are used Exterior is for more critical. Corrosion and weather ability are important considerations. The location of parts close to roads & freeways, chemical plants, coastal regions or other corrosive environments are critical defying the end use performance. Pretreatment on steel, If the substrate is heavy enough to handle it, grit blasting to sp10, 2 to 4 mil profile is always recommended. A corrosion resistant Base coat and UV resistant top coat are recommended and can greatly very based on the corrosive exposure. For typical steel lawn and garden products a five stage iron phosphate pretreatment and a good quality polyester is generally satisfactory. For typical aluminum extrusion window, lawn and garden products a five stage aluminum conversion pretreatment and a good quality polyester is generally satisfactory.....
 

« Previous12Next »

Back
Powder Coating Institute SSPC armourwrap PipeViper International ACL